Soundstream 705s. Wiring in a single sub?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63862
Printed Date: May 20, 2024 at 2:23 AM

Topic: Soundstream 705s. Wiring in a single sub?

Posted By: london luke
Subject: Soundstream 705s. Wiring in a single sub?
Date Posted: October 05, 2005 at 5:21 PM

havin th esystem installed soon. I am buying off the installer a single Aliante 10.inch subwoofer.

4.ohm. Can the amp mono outputs run bridged??

cheers

Replies:

Posted By: Blowntweeters
Date Posted: October 05, 2005 at 5:26 PM

the mono out put is only 1 channel. you cant bridge that.

-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

Posted By: london luke
Date Posted: October 06, 2005 at 2:14 AM

It has 2 x mono outputs.

wondering if both mono can I still bridge?

Posted By: Blowntweeters
Date Posted: October 06, 2005 at 1:07 PM

i would call soundstream

-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

Posted By: london luke
Date Posted: October 06, 2005 at 2:36 PM

Soundstream dont answer phone or emails. heard they are bust

Posted By: london luke
Date Posted: October 06, 2005 at 4:12 PM

posted_image

In th epic you can see that each mono speaker connector has a + and a - . So by using the "Hot +" etc and the other - would this in effect bridge the amps??

Cheers

Posted By: rallysport
Date Posted: October 06, 2005 at 4:21 PM

if its a mono amp there is only one channel of output, mulitple connects are there for easyier hookup, internally both connection points are connected. same as asked here https://www.the12volt.com/installbay/forum_posts.asp?tid=63896&PN=1

-------------

Posted By: london luke
Date Posted: October 06, 2005 at 6:01 PM

Starting to understand.. !! I want to get as much power out of it to run my Aliante 10 inch subwoofer.

Thanks

Print Page | Close Window