Print Page | Close Window

Series & parallel Subs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64316
Printed Date: October 31, 2024 at 6:07 PM


Topic: Series & parallel Subs

Posted By: konrad100
Subject: Series & parallel Subs
Date Posted: October 13, 2005 at 5:02 PM

I have 2 subs and they have dual 4 ohm voice coils. My question is i would like to hook each the woofer in parallel at the woofer connection so it will make a 2 ohm speaker then OUTSIDE of the box hook the wires up is series    1 sub to the other, that will give me a 4 ohm load....IS THAT CORRECT????????
The only reason i want to do it this way is becuse then i can just disconnect the series hook up outside of the box and have each sub at 2 ohms, at this point i have of the best worlds without taking the subs out if i ever decide to get another amp and hook each up with 2 ohm load....Will this connection be ok if i do it this way or is it better just to hook it up in series at the woofer and then parellael outside...i think i may have answerd my own question just now it(probably doesn't matter) if i do it this way or this way. But please let me know what is the best way to do it or it just doesn't matter.....??



Replies:

Posted By: DYohn
Date Posted: October 13, 2005 at 5:06 PM
Your plan will work fine.

-------------
Support the12volt.com





Print Page | Close Window