power through chevy balzer firewall

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76925
Printed Date: May 23, 2024 at 3:07 AM

Topic: power through chevy balzer firewall

Posted By: ssabboy2003
Subject: power through chevy balzer firewall
Date Posted: April 27, 2006 at 11:18 PM

Where is the best place to run the power wire in a late 90"s model Chevy 2Dr

Blazer. Any ideals or suggestions will be awesome!!! Peace! SSABBOY2003

-------------
SSABBOY2003

Replies:

Posted By: godblessdremil
Date Posted: April 28, 2006 at 1:55 AM

Look for a gasket or hole pre-made in the firewall. I believe there is a place on the driver side.

Posted By: snoracer98
Date Posted: April 28, 2006 at 11:07 AM

follow your antenna lead in from the engine compartment. theres a rubber gasket that you can either pull out or depending on power wire thickness run inside the gasket. should only take a few minutes to run the wire this way.

Posted By: kirktcashalini
Date Posted: April 28, 2006 at 11:35 AM

passenger side, like 5" under the carpet near passengers feet. 1" hole just gotta rip out the dubber gasket :) works with 0gauge

-------------
99 Blazer LT. Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

Print Page | Close Window