speakers, 92 mazda 929
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77939
Printed Date: June 10, 2024 at 1:21 PM
Topic: speakers, 92 mazda 929
Posted By: rock1
Subject: speakers, 92 mazda 929
Date Posted: May 17, 2006 at 4:15 PM
The factory speakers have a harness that connects to the speakers . but when trying to install aftermarket speakers there is no place to install this harness to the speakers .Do I need to get some adapter to connect the speakers?
Replies:
Posted By: mustangfoo
Date Posted: May 17, 2006 at 4:39 PM
could cut them or tap into them
Posted By: rock1
Date Posted: May 17, 2006 at 4:41 PM
what color do I tap into?
Posted By: DYohn
Date Posted: May 17, 2006 at 4:52 PM
There are speaker adapters for most manufacturers sold by places like Crutchfield. ------------- Support the12volt.com
Posted By: tcss
Date Posted: May 17, 2006 at 4:53 PM
What is the make and model of your car?
-------------
There is no such thing as free installation!
Posted By: mustangfoo
Date Posted: May 17, 2006 at 4:57 PM
need some more info, make model year so I can look up the color codes, but you would tap into both wires, but we need to find out which is + and which is -.
Posted By: rock1
Date Posted: May 17, 2006 at 4:59 PM
this is a 92 mazda 929
Posted By: tcss
Date Posted: May 17, 2006 at 5:02 PM
Go to general info on the left side of this page and click on vehicle wiring, it's in there.
-------------
There is no such thing as free installation!
Posted By: rock1
Date Posted: May 17, 2006 at 5:11 PM
The aftermarket has only two slide in connectors so how would I connect it to the main harness
Posted By: tcss
Date Posted: May 17, 2006 at 5:24 PM
Clip them off and crimp on .125 and .250 female spade connectors.
-------------
There is no such thing as free installation!
Posted By: the12volt
Date Posted: May 17, 2006 at 5:30 PM
Posted By: rock1
Date Posted: May 20, 2006 at 6:37 PM
I got a 160watt cd player 40x4 and what speakers should I use with them?
Posted By: rock1
Date Posted: May 20, 2006 at 6:50 PM
I got a jvc hx6956 speaker with the 6846
Posted By: rock1
Date Posted: May 24, 2006 at 12:02 PM
The color chart does not match whats on the car. what do I do now
Posted By: geepherder
Date Posted: May 24, 2006 at 8:42 PM
Read the sticky "how to figure out stereo wiring".
-------------
My ex once told me I have a perfect face for radio.
Posted By: rock1
Date Posted: May 24, 2006 at 11:01 PM
Thats not the issue. the harness that I crimped together I dont know what cable is the postive wire and negative wire on the car harness. since I can plug the speaker harness with the stock harness together but at the end of the speaker harness I got two crimped ends but I dont know what end should go to the postive tap on the speaker and negative tap.
Posted By: geepherder
Date Posted: May 25, 2006 at 9:50 PM
Again, read the sticky. This is explained.
-------------
My ex once told me I have a perfect face for radio.
Posted By: rock1
Date Posted: May 25, 2006 at 9:52 PM
Its ok now
|
the12volt •