2007 avalanche, pioneer avic-z1
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78630
Printed Date: June 16, 2024 at 8:51 PM
Topic: 2007 avalanche, pioneer avic-z1
Posted By: mistahiggs
Subject: 2007 avalanche, pioneer avic-z1
Date Posted: June 02, 2006 at 5:42 PM
I'm in the process of selling a pioneer avic-z1 to a customer buying a 2007 chevy avalanche. The dash looks like it can fit a double din system, but does anyone know of wiring conflicts that I may run into such as data links, on star etc?
Replies:
Posted By: cntrylvr79
Date Posted: June 02, 2006 at 7:39 PM
At the moment, I don't beleive there is any interface availible that would allow the onstar to work while replacing the factory radio.
-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer
Posted By: doibuy
Date Posted: June 02, 2006 at 8:32 PM
To my knowledge they don't even have a wire harness available yet.
Posted By: mistahiggs
Date Posted: June 03, 2006 at 8:09 AM
All I'm looking for is " is there going to be major problems taking the OEM radio out and hard wiring in an avic-z1" I already told him that he will be losing his stering wheel controls, and the on star if it's equipped. Is there anything like a data bus cable for a digital turn on signal to the factory amp that i'll have to bypass?
Posted By: sparkie
Date Posted: June 03, 2006 at 11:14 AM
Unfortunately, you can't remove the factory radio without causing the vehicle serious problems and voiding certain warranty repairs. You would be better of to try and relocate the radio and trying to interface if that way. There are no kits for radio mounting or interfacing on GM's LAN/CAN bus system yet. If the truck has a factory video system, then you will also need to wire in a new DVD for it to work as the factory radio contains the DVD player.
-------------
sparky
Posted By: mistahiggs
Date Posted: June 03, 2006 at 11:21 AM
if i relocate the factory radio, can the onstar function still be accessed? not too worried about the dvd function since he is looking at an alpine overhead dvd system.
|