mtx remote bass control problem
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79629
Printed Date: May 28, 2024 at 2:36 PM
Topic: mtx remote bass control problem
Posted By: mech3
Subject: mtx remote bass control problem
Date Posted: June 25, 2006 at 10:23 PM
I recently installed my remote bass control for my mtx amp and it was working fine, but all of a sudden whenever the remote control is plugged in, the gain goes to the minimum level, and turning the the knob up does nothing. I am wondering if the remote bass control is defective, or the port on the amp itself. I was wondering if any of you have had a problem like this?
Replies:
Posted By: Velocity Motors
Date Posted: June 25, 2006 at 11:27 PM
Do you have access to another basss control knob ? If the wire connection is not pushed in all the way this could cause problems aswell.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Ravendarat
Date Posted: June 25, 2006 at 11:37 PM
Quick question, where is your gain on the amp set at?
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Posted By: mech3
Date Posted: June 26, 2006 at 6:56 AM
Ravendarat wrote:
Quick question, where is your gain on the amp set at?
its set a little under half way. Also I might have access to another remote bass knob. I am checking on that to test
Posted By: mech3
Date Posted: June 27, 2006 at 7:11 AM
I forgot that I had a second remote bass knob that came with my other mtx amp. Installed it and it works fine, I guess the control went bad. Thanks all
|