1995 lincoln continental harness
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84339
Printed Date: June 10, 2024 at 5:56 AM
Topic: 1995 lincoln continental harness
Posted By: opy1095
Subject: 1995 lincoln continental harness
Date Posted: October 19, 2006 at 11:05 AM
metra says the harness for this car is a 705600 but when i try to use it the green connector is wrong...does anyone kno the right harness or wire colors...(the colors listed on the site are different from the ones in my car)
Replies:
Posted By: opy1095
Date Posted: October 19, 2006 at 1:40 PM
no this one doesnt fit either
Posted By: geepherder
Date Posted: October 19, 2006 at 6:58 PM
See if it's this one: https://www.scosche.com/scosche_caraudio.aspx?ItemID=FDK10B&CategoryID=78
Also look up on scosche and metra the plugs for a 94.
-------------
My ex once told me I have a perfect face for radio.
Posted By: opy1095
Date Posted: October 19, 2006 at 8:15 PM
the power harness was right (the grey connector)----the green one was close but a little too big and the square black one was too small.....but this was athe exact same as the 705600 by metra that dont fit
Posted By: crazziazz
Date Posted: October 20, 2006 at 8:12 AM
i think that car as a amp in it . i belive everything is ran from the back to the front. there should be a small amp in the trunk behind the backseat wall. there you will be able to do a bypass.it's either that or the tuner pack in the right rear quater panel.it seems i remember running wires in that car. you can also call metra tech they can tell you for sure. but i belive i am correct. but double check trible check.
crazziazz
Posted By: opy1095
Date Posted: October 20, 2006 at 2:31 PM
yes a amp...but no tuner
Posted By: crazziazz
Date Posted: October 21, 2006 at 8:26 AM
if it is an amp.then you need a 70-5516. i think thats the model number.it as all the ford harness in the bag. the speaker bypass plug(black with 2 ends on it). it will plug up to the amp in the back.cut the other end and run your on wires to the unit.and match the colors at the amp. white white balck etc. this is the fastest and easist way to bypass tha sys.good luck.
crazziazz
|