amp connection issue on everstart battery

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90784
Printed Date: May 29, 2024 at 4:35 AM

Topic: amp connection issue on everstart battery

Posted By: kroxic
Subject: amp connection issue on everstart battery
Date Posted: February 21, 2007 at 9:30 PM

I Just got a 1992 buick with an Everstart Battery. The battery has a strange capped connection without a post for the engine and all of that. However, this left me with no place to connect my amp wire. I cut some of the plastic/rubber away and managed to tighten it between the special connector.

Now I am getting ready to do a big 3 upgrade and I am wondering if this is even goign to work because of the connector. Is there some way I can get a post on there or am I just crap out of luck?

Thanks in advance.
PS this is my first post and i just found this site today and Im enjoying it.

Replies:

Posted By: aznboi3644
Date Posted: February 21, 2007 at 11:32 PM

get some TOP POST TERMINALS

Posted By: kroxic
Date Posted: February 22, 2007 at 7:49 AM

Do i need any special kind or do i just search ebay for top post terminals and buy whatever i see first?

Posted By: kroxic
Date Posted: February 22, 2007 at 7:53 AM

kroxic wrote:

Do i need any special kind or do i just search ebay for top post terminals and buy whatever i see first?

I just searched around for battery terminals. I know what that is. But i dont have a post to connect those too. I need to actually get a post on the battery

Posted By: aznboi3644
Date Posted: February 22, 2007 at 6:07 PM

These are what I suggest

https://www.doityourself.com/invt/u190782