sony xm 554zr xplod 600 watt 4 chann
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91761
Printed Date: May 26, 2024 at 12:04 PM
Topic: sony xm 554zr xplod 600 watt 4 chann
Posted By: megatfauzi76
Subject: sony xm 554zr xplod 600 watt 4 chann
Date Posted: March 15, 2007 at 10:14 PM
Im just instal Sony XM 554ZR Xplod 600 Watt 4 Channel ...Im using 4speaker...FRONT=1 way speaker and REAR=2 way speaker.. My problem, the sound are too low compare before I install the amp....What the problem? Any idea?
Replies:
Posted By: haemphyst
Date Posted: March 15, 2007 at 10:38 PM
First off, that amp isn't even CLOSE to 600 watts, or 150 watts per channel, just so that you know that for future reference. If I had to guess, probably more like 300 watts, continuous...
Secondly, have you adjusted your gains properly?
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: jmelton86
Date Posted: March 17, 2007 at 8:36 AM
Also, what kind and impedance are the speakers? If they are, say, factory 16Ohm speakers, they will only load the amp at 16Ohms instead of a 4Ohm load -Meaning, the amp would only put out 18.75 watts continuous x4(assuming it does put out 75wrms x4. Also the sensitivity of the speakers' suggests how much they produce.
-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
|