directed 1100d amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94015
Printed Date: May 31, 2024 at 7:44 PM
Topic: directed 1100d amp
Posted By: drastikkreation
Subject: directed 1100d amp
Date Posted: May 17, 2007 at 7:58 PM
I have been looking at the wiring diagrams for subs. but i have yet to figure out how to wire my subs to the amp. I have (2) Audiobahn 4ohm DVC. I want to go to a 1ohm stable loadif at all possible. Everything is telling me to connect the subs together and just run to one side of the amp. Is this correct? If not could somebody please tell me how to wire correctly.
Replies:
Posted By: jeffchilcott
Date Posted: May 17, 2007 at 9:38 PM
the only is ONE side of the amp you have a mono amp..hence one channel. if the amp is 1 ohm stable connect all the postives all the negatives and plug into amp. done
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: tdsteele
Date Posted: May 17, 2007 at 10:06 PM
|
