amplified subwoofer
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97310
Printed Date: May 28, 2024 at 9:43 PM
Topic: amplified subwoofer
Posted By: gsoublis
Subject: amplified subwoofer
Date Posted: September 20, 2007 at 8:42 PM
I was wondering if someone could please help me out. I am installing an amplified subwoofer into a 2003 GMC Yukon Denali with premium digital sound. The issue I am running into is that I see the 12V battery and ground on the wiring diagram but there is nothing as far as 12V acc is concerned. I am planning on using the high level input connections. If I use the high level inputs do I need to still connect the accessory lead? The high level input wires should they be spliced into the front, rear, or subwoofer speakers? Also, the system is already amplified, so will this cause an issue with me trying to splice the wires into the system? Thank you.
Replies:
Posted By: throwback2332
Date Posted: September 21, 2007 at 3:25 AM
STOP PLEASE
You need to take it to a aftermarket stereo shop and have them pull your radio and/or find a unamplified signal to tap into.
-------------
If it's not custom, then it's not you.
|