Print Page | Close Window

amp problem

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99389
Printed Date: April 29, 2024 at 4:13 AM


Topic: amp problem

Posted By: mista_g713
Subject: amp problem
Date Posted: November 26, 2007 at 10:01 PM

my subs and 6x9s suddenly stopped working. i have a distribution block with built in amp display and volt display. the voltage is good but it displays zero amps. all the fuses are good and everything turns on. what could the problem be?

my system:  3way crossover with a 400w 2 ch and a 800w mono amps. 2 farad cap. 2 audiobahn subs and 4 infinity 6x9s.




Replies:

Posted By: haemphyst
Date Posted: November 26, 2007 at 11:02 PM
1: Head unit
2: Cheezy amplifiers that are, in fact, dead (based on the general lack of information, the vague power ratings, the inclusion of ANYTHING Audiobahn, I suspect this could be it...)
3: Dead crossover
4: Bad RCA cable(s)

The list goes on! Help us help you... What have you done to troubleshoot? Were there warning signs of impending failure, or did it quit all at once, all of a sudden? What are your head unit, amplifier, and crossover makes and models EXACTLY? Do you have any LOCs in the system?

We can't read your mind! posted_image

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."





Print Page | Close Window