pioneer volume problem

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99736
Printed Date: May 18, 2024 at 12:24 AM

Topic: pioneer volume problem

Posted By: nava94
Subject: pioneer volume problem
Date Posted: December 06, 2007 at 10:20 PM

hey guys have a 2006 pioneer cd radio that has face graphics in a 1992 honda accord that has a year and a half that I did the install and the customer says the radio volume lowers itself when he presses the foot brake, and when he accelerates the volume goes back to normal after a couple seconds.this is the second customer that tells me the same is it because they changed some setting on the radio or does it need to be reset? or is it a defect? the install is ok no loose connections.what is causing this?thanks in advance.

Replies:

Posted By: mobile1
Date Posted: December 06, 2007 at 10:38 PM

The customer probably has the ASL feature turned on. I believe it stands for Audio Speed Level. When the road noise increases (acceleration) the volume goes up, when it lowers (brake) it goes down. There is a low medium and high setting for this or you can just turn it off.

Posted By: nava94
Date Posted: December 07, 2007 at 11:41 AM

thanks mobile 1, i had a feeling it was going to be something simple like that. thanks a bunch, good looking out.