DEI 528t, Siren Delay
Printed From: the12volt.comForum Name: Car Security and Convenience - Hot Topics
Forum Discription: Stickied topics from our Car Security and Convenience forum. Car Security and Convenience FAQs. Read First!
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117973
Printed Date: April 25, 2024 at 10:50 AM
Topic: DEI 528t, Siren Delay
Posted By: Hoot
Subject: DEI 528t, Siren Delay
Date Posted: November 24, 2009 at 6:18 AM
This is a circuit I'm using in my truck that's triggered by the siren output of the alarm. It delays output to additional alarm lights and sirens. Right now I have two Aux relays that control two circuits that are isolated from each other. One for LED's and one for an additional siren. These lights and siren needed to be isolated because they are also switched on manually and cannot be allowed to backfeed into each other. I originally tried it without the 'Delay' relay, but found that the 528T was pulling the Normally closed circuit open at the same time that the Aux relay was closing, resulting in a very brief flicker of the LED's. With the additional relay inserted, the flicker is eliminated.
Result:
Arming and disarming chirps only use the car alarm siren.
During full alarm, and after a two second delay, LED's and secondary siren are activated.
I hope somebody will find it useful.
Hoot
Replies:
Posted By: howie ll
Date Posted: November 24, 2009 at 6:50 AM
Posted By: profuse007
Date Posted: December 04, 2009 at 8:29 AM