Print Page | Close Window

remote start, 98 suburban

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101127
Printed Date: May 18, 2024 at 10:39 PM


Topic: remote start, 98 suburban

Posted By: 1carshowking
Subject: remote start, 98 suburban
Date Posted: January 13, 2008 at 9:05 PM

I was just installing a python 1600xp alarm/remote start in a 98 suburban, i put all the wires together  including the tach.

after i was done i tested the alarm it would lock/unlock and all the features work but when i remote started it it would crank, start and shut off. it didnt need a bypass or anything. so if any body has any information that would help please let me know. Thanks!!




Replies:

Posted By: another-kelly
Date Posted: January 13, 2008 at 10:38 PM
you sure it doesn't have Passlock II? you may want to double check cause it should




Posted By: brcidd
Date Posted: January 13, 2008 at 10:45 PM
when remote starting, crank, start and shut off is EXACTLY what happens to a C/K truck that has Passlock and you fail to bypass it--all GM C/K trucks started using Passlock in model year 1998- so your burban needs to be bypassed- I use the Gmata II which is a "dial-in" resistive bypass - very easy to use on that truck- can easily get the wires at the BCM- right in front of your face when looking under the steering colum................

-------------
Brcidd - Engineer That Does Remote Starter Installs on the side.




Posted By: 1carshowking
Date Posted: January 14, 2008 at 7:35 PM

im sure it dosnt have PL II   i checked, i was on it for 4 hours





Posted By: brcidd
Date Posted: January 14, 2008 at 7:43 PM

So your '98 is the only one ever made without it????  You sure you don't have the yellow, black, and RED / white wires-- going down the steering column to the BCM?  - bremember Passlock II is NOT Passkey-- there are no chips in the keys of Passlock II  the hall effect elements are in the iginition switch- not visible- and a standard hardware key can be used--- but the passlock II activates on tumbler turn...



-------------
Brcidd - Engineer That Does Remote Starter Installs on the side.




Posted By: V8Sonoma
Date Posted: January 14, 2008 at 8:00 PM
As said in the above posts,your 1998 Suburban does have the passlock system.You should have a theft/security light in your cluster.




Posted By: 1carshowking
Date Posted: January 14, 2008 at 8:19 PM
yoo brcidd that makes sense it dosnt have a chip in the key i found that ring around the key cylinder Thanks!!  i was conffused because i had my bubby bitchinn a strom because it didt work i was getting ready to rip the crap out of it a tell him to pay to get it done  (you know what i mean when somebodys over your soulder bitchinn)!!!!!!!!!!!!




Posted By: brhaugen
Date Posted: January 14, 2008 at 9:41 PM

I have installed for freinds many times.

But I never let them hang around.






Print Page | Close Window