Print Page | Close Window

98 toyota camry factory disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101622
Printed Date: June 08, 2024 at 9:21 AM


Topic: 98 toyota camry factory disarm

Posted By: mysearch
Subject: 98 toyota camry factory disarm
Date Posted: January 27, 2008 at 1:17 PM

Good Afternoon

  I would like to know how to disarm the factory antitheft /alarm system on a 1998 Toyota Camry LE. I didn't see any disarm in the wiring diagram on this site.

Thanks



-------------
mysearch



Replies:

Posted By: dusco
Date Posted: January 27, 2008 at 1:22 PM

why do you need to disarm the factory alarm? are you hooking up a remote start or aftermarket alarm? what kind of aftermarket system are you using?




Posted By: GregK
Date Posted: January 27, 2008 at 1:39 PM
It disarms with the keysense wire - Blue/Black.

-------------
GDK Electronics
Home theatre & mobile electronics installations
Winnipeg, MB



Posted By: perly
Date Posted: January 28, 2008 at 10:16 AM
GregK] wrote:
It disarms with the keysense wire - Blue/Black.


just run the ground out when running to the keysense and that should solve any issues



Posted By: mysearch
Date Posted: January 28, 2008 at 11:43 AM

Thank you dusco, GregK and perly for your replies. We have a customer who lost their remote and was unable to disarm the factory system using the ignition key in either front door or when putting key in the ignition switch and attempting to start the car. The information you provided will be very helpful in getting vehicle started and diagnosing the system. Thanks again.

mysearch



-------------
mysearch


Print Page | Close Window