clifford valet switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101669
Printed Date: May 28, 2024 at 8:38 PM

Topic: clifford valet switch

Posted By: matthufham
Subject: clifford valet switch
Date Posted: January 28, 2008 at 6:58 PM

i got a clifford concept 100 alarm where the plainview 2 switch is cut off. it has a * and a blank button. the wires off the brain are white and black. can i run a switch or 2 and make it work? how would i do this

Replies:

Posted By: Twelvoltz
Date Posted: January 28, 2008 at 7:16 PM

I would suggest picking up a new one, although they are really just standard switches in a nice housing and could be reproduced using plain switches, a quick google search turned up several spots where you can get one shipped to you for around $10.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: ringojam
Date Posted: January 28, 2008 at 7:23 PM

You have to use back a clifford switch, no other switch will work.

-------------
Jamaica home of the worlds fastest man.

Posted By: matthufham
Date Posted: January 28, 2008 at 9:40 PM

i bought one on ebay. ended up being 11 or 12 dollars. thanks for the quick replies!

Print Page | Close Window