2008 cts, alarm wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102891
Printed Date: May 14, 2024 at 8:09 AM
Topic: 2008 cts, alarm wiring
Posted By: jayyzr
Subject: 2008 cts, alarm wiring
Date Posted: March 08, 2008 at 12:45 PM
Anybody work on the 2008 Cadillac CTS lately. I am installing a alarm on it and need the door lock wires, the 07 wires don't match up... THanks ------------- Taking It 1 Wire @ A Time...
Replies:
Posted By: Chris Luongo
Date Posted: March 08, 2008 at 1:00 PM
Most likely, the locks would probably be like the other new GMs.......Lucerne, Tahoe, etcetera.
DEI has a document about how to solder wires to the circuit board inside the driver's door, but I don't think it's worth the trouble.
I'm pretty sure Trilogix (www.bypasskit.com) should have firmware for their XK01 module for the CTS by now.
Posted By: jayyzr
Date Posted: March 08, 2008 at 1:07 PM
yeah had the XK01 overnight from them yesterday but the cts dosn't have the purple #2 pin @ OBDII ( on board diagnostic connector????
-------------
Taking It 1 Wire @ A Time...
Posted By: tedmond
Date Posted: March 08, 2008 at 1:49 PM
the wire should be GREEN Pin # 1 This is the DATA wire, i double checked with bypasskit for their wiring pinout, and also checked with Fortin data wires and they are the same.
Posted By: jayyzr
Date Posted: March 08, 2008 at 2:14 PM
pin #1 on the OBDII? I ask b/c when XK01 is connected the light dosn't turn off when i turn the ignition on to program it
-------------
Taking It 1 Wire @ A Time...
Posted By: Chris Luongo
Date Posted: March 08, 2008 at 3:13 PM
Did you order the XK01 directly from Trilogix?
Do you have a way to know what firmware is in your module? (Do you have the XKLoader cable?)
Does the sticker on top indicate which firmware it has?
According to their site, you need..........ah, I was just there and I forgot.....GMDL something........ if you go to www.xpressdownload and type in your kind of car, it'll show you.
Posted By: chriswallace187
Date Posted: March 08, 2008 at 3:44 PM
GMDL6X is the firmware needed for '08 CTS...jayyzr have you tried to reset the module yet?
-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
Posted By: jayyzr
Date Posted: March 08, 2008 at 4:59 PM
I unplugged it for 5 mins then tried it again...
-------------
Taking It 1 Wire @ A Time...
Posted By: tedmond
Date Posted: March 08, 2008 at 5:52 PM
thats not really resetting. hold hte programming button, plug in the the harness and it will clear. then reprogram.
Posted By: jayyzr
Date Posted: March 09, 2008 at 12:39 PM
I will try that monday when they bring the car back.. I will let you know what happen. thanks
-------------
Taking It 1 Wire @ A Time...
|