Print Page | Close Window

2005 nissan altima, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105734
Printed Date: April 23, 2024 at 7:37 PM


Topic: 2005 nissan altima, remote start

Posted By: 2003kawasaki
Subject: 2005 nissan altima, remote start
Date Posted: June 27, 2008 at 10:50 AM

I am looking to install a 561t into an altima 2005. I need a second starter wire for this. Can I use the 4 pin harness,purple wire and a relay for this?

Kurt




Replies:

Posted By: fcss
Date Posted: June 27, 2008 at 10:57 AM

ya you can its a neg so like you said you will use a relay to convert it to pos.





Posted By: 2003kawasaki
Date Posted: July 07, 2008 at 1:42 PM

Can someone post a picture of the ignition switch from the back side so I can see the arrangement of the wires as in place. I need to know wich wire go to each opening of the plug. I am having problem starting my car now.

Thanks





Posted By: 2003kawasaki
Date Posted: July 07, 2008 at 1:44 PM
I forgot to add in that it is for a Nissan Alitima 2005 4cyl




Posted By: smcshark
Date Posted: July 07, 2008 at 2:55 PM

don't have picture

Batt Green

Ign 1 Black Red (Small)

Start 1 Black / red

Start2 Black / Yellow

Acc 1 Red



-------------
Automotive Electronic Specialist




Posted By: Chris Luongo
Date Posted: July 08, 2008 at 7:42 PM
Just did one of those this morning.

Pretty much all Nissans use the same wiring plug, with the wires in the same locations, just with different colors.

If I remember right:

Hold the plug with the wires facing you, and the clip facing up.

Top left: constant

Bottom left, and center top: Starter wires

Center bottom: radio

Top right: ignition

Bottom right: climate controls




Posted By: 2003kawasaki
Date Posted: July 09, 2008 at 8:04 AM

I checked my wirers and every thing is fine, so I tried a new ignition key and the car started up with no problems.

Thanks






Print Page | Close Window