I want install Viper 160XV with 1700G in my Tahoe 2005 Z71
I want be sure that’s all my connects OK.
Help me please
(N/C) : Not Connected
C : Car wires
G : 1700G M. wires
Tahoe (Z71)2005 wires
=============================
No. color : description :
----- -------- ---------------------------
C 1 RED +12V ignition harness
C 2 Connected to the body (-)
C 3 RED / white +12V ignition harness
C 4 Yellow Starter- ignition harness
C 5 Pink Ignition- harness
C 6 White Second Ignition harness
C 7 orange Accessory ignition harness
C 8 brown Second Accessory ignition harness
C 9 White Brake light (+)brake pedal switch.
C10 gray/black Parking Lights(-)switch or BCM, brown plug, pin B2
C11 ----------------- Pin2 in the OBD2 connecter
C12 light green Keysense
C13 BLACK / YELLOW to black Horn Trigger (-) switch or BCM, gray plug, pin B9
C14 gray/black driver door trigger at the driver door module
C15 BLACK/ white RF door trigger at the passenger door module
C16 blue/black LR d. trigger pin A3 in the purple plug at the BCM
C17 Li.GREEN/ black RR d. trigger pin A2 in the purple plug BCM
C18 gray/black Dome Supervision - BCM, black plug, pin E
C19 gray Lock Motor 5Wi ! driver door module in door
C20 tan Unlock Motor 5Wi ! driver door module in door
Viper 160XV Remote starter wires
======================================================================
No. color : description : connect to :
----- -------- --------------- ------------------------------------------
H1/1 Orange (-)500mA Armed Output ( N/C )
H1/2 white (-)/(+) selectable light flash Output---------------------C 10 (gray/black(-)Parking light )
H1/3 WHITE/ Blue (-) Remote start Activation input ( N/C )
H1/4 BLACK/ White (-) 200mA Domelight supervition Output ( N/C )
H1/6 Blue (-) Second Unlock Output------------------------------------ G 10 ( Li.Blue (-) Disarm/Unlock all door)
H1/8 Black (-) Chassis ground Input--------------------------------------C 2 body(-)
H1/10 Brown (-) Horn Honk Output ------------------------------------------C 13 ( BLACK / YELLOW to black Horn Tr. (-)
H1/11 Red (+) Constant Power Input--------------------------------------C 3 (R/w +12V ignition h. )
H1/12 RED / White (-) 200mA Channel 2 Validity Output ( N/C )
H2/1 Violet/ Black (-) Channel 4 Output ( N/C )
H2/2 GREEN/ White (-) Factory rearm Output------------------------------- G 4 ( GREEN/ Black (-) Arm/lock input )
H2/3 Gray/ Black (-) ( N/C )
H2/4 Li.GREEN/ Black (-) Factory Disarm Output----------------------------- G 6 ( Blue/Black (-) Disarm/Unlock d. door )
H3/1 Blue/ White (-) 200mA 2nd status/rear defogger - Latched/pulsed
H3/2 Gray (-) Hood pinswitch shutdown wire ( N/C )
H3/3 Brown (+) Brake switch shutdown wire---------------------C 9 (White (+) brake pedal switch )
H3/4 Violet/ White tachometer input wire ( N/C )
H3/5 BLACK/ White (-) Neutral safety switch input ( N/C )
H4/1 Green (-) lock (+) Unlock--------------------------------------------------C 19 ( gray Lock Motor )
H4/3 Blue (+) lock (-) Unlock---------------------------------------------------C 20 ( tan Unlock Motor )
Remote start auxiliary harness wiring diagram
=============================
1 Blue (-) 200mA status Output ------------------------------- G 11 ( Blue (-) Remote status input )
2 Orange (-) 220mA Accessory relay trigger ( N/C )
3 Pink (-) 220mA Ignition relay trigger ( N/C )
4 Purple (-) 220mA Starter relay trigger ( N/C )
Heavy gauge relay satellite wiring diagram
=============================
1 Purple (+) Starter Output to starter Side------------------------C 4 (Y. Starter ignition h.)
2 Green Starter input from Ignition ( key side )------------------C 4 (Y. Starter ignition h.)
3 Red (+) 30A High Current 12V input--------------------------C 1 (Red+12V ignition h.)
4 Orange (+) Output to Accessory Circuit--------------------------C 7 (Orange Acc ignition h.)
5 Red (+) 30A High Current 12V input------------------------- C 1 (Red +12V ignition h.)
6 Pink (+) Output to Ignition circuit-------------------------------C 5 (Pink Ignition h. )
7 RED / White High Current 12V input------------------------------------C 1 (Red +12V ignition h.)
8 Pink/ White (+) Output to 2nd Ignition /Accessory circuit----------C 6 (White 2nd Ignition h.)
1700G module wires
==============================================================================
No. color : description : connect to :
----- --------- ---------------- -------------------
G 1 red 12V (+) ------------------------------------------- C 1 (Red +12V ignition h. )
G 2 Black (-)-------------------------------------------------- C 2 (-)body
G 3 BROWN / White (-) Panic input ( N/C )
G 4 GREEN/ Black (-) Arm/lock input ------------------------------H2/2
G 5 Violet/Black (-) Key sense input---------------------------C12 ( li.green Keysense )
G 6 Blue/Black (-) Disarm/Unlock driver door---------------H2/4
G 7 RED / White (-) Trunk release input. ( N/C )
G 8 Green (-) Door trigger output-------------------------C14,15,16,17 + diodes
G 9 Gray/Black (+) Dome light Monitor input ----------------C18 ( gray/black Dome Supervision )
G 10 Light Blue (-) Disarm/Unlock all doors input----------H1/6
G 11 Blue (-) Remote start status input----------------Remote aux./1
G 12 Purple J1850 Data output ---------------------------C11 (Pin2 in the OBD2)
I want to verify the validity of wires connection
1-Is it necessary to hook the Alarm H4/1(Green) & H4/3(Blue) wires to my car, If I do connected H2/2 (GREEN / WHITE) & H2/3 (Gray/Black) to 1700G module.
2-there is no(-)Door trigger in the 160xv alarm to connect with 1700G module. what can i do?
thanks
Final installation
The car is working well
Viper 160XV Remote starter wires
======================================================================
No. color : description : connect to :
----- -------- --------------- ------------------------------------------
H1/1 Orange (-)500mA Armed Output ( N/C )
H1/2 white (-)/(+) selectable light flash Output---------------------C 10 (gray/black(-)Parking light )
H1/3 WHITE/ Blue (-) Remote start Activation input ( N/C )
H1/4 BLACK/ White (-) 200mA Domelight supervition Output ( N/C )
H1/6 Blue (-) Second Unlock Output------------------------------------ G 10 ( Li.Blue (-) Disarm/Unlock all door)
H1/8 Black (-) Chassis ground Input--------------------------------------C 2 body(-)
H1/10 Brown (-) Horn Honk Output ------------------------------------------C 13 ( BLACK / YELLOW to black Horn Tr. (-)
H1/11 Red (+) Constant Power Input--------------------------------------C 3 (R/w +12V ignition h. )
H1/12 RED / White (-) 200mA Channel 2 Validity Output ( N/C )
H2/1 Violet/ Black (-) Channel 4 Output ( N/C )
H2/2 GREEN/ White (-) Factory rearm Output ( N/C )
H2/3 Gray/ Black (-) ( N/C )
H2/4 Li.GREEN/ Black (-) Factory Disarm Output ( N/C )
H3/1 Blue/ White (-) 200mA 2nd status/rear defogger - Latched/pulsed( N/C )
H3/2 Gray (-) Hood pinswitch shutdown wire ( N/C )
H3/3 Brown (+) Brake switch shutdown wire---------------------C 9 (White (+) brake pedal switch )
H3/4 Violet/ White tachometer input wire ( N/C )
H3/5 BLACK/ White (-) Neutral safety switch input ( N/C )
H4/1 Green (-) lock (+) Unlock--------------------------------------------------G 4 ( GREEN/ Black (-) Arm/lock input )
H4/3 Blue (+) lock (-) Unlock---------------------------------------------------G 6 ( Blue/Black (-) Disarm/Unlock d. door )
Remote start auxiliary harness wiring diagram
=============================
1 Blue (-) 200mA status Output ------------------------------- G 11 ( Blue (-) Remote status input )
2 Orange (-) 220mA Accessory relay trigger ( N/C )
3 Pink (-) 220mA Ignition relay trigger ( N/C )
4 Purple (-) 220mA Starter relay trigger ( N/C )
Heavy gauge relay satellite wiring diagram
=============================
1 Purple (+) Starter Output to starter Side------------------------C 4 (Y. Starter ignition h.)
2 Green Starter input from Ignition ( key side )------------------C 4 (Y. Starter ignition h.)
3 Red (+) 30A High Current 12V input--------------------------C 1 (Red+12V ignition h.)
4 Orange (+) Output to Accessory Circuit--------------------------C 7 (Orange Acc ignition h.)
5 Red (+) 30A High Current 12V input------------------------- C 1 (Red +12V ignition h.)
6 Pink (+) Output to Ignition circuit-------------------------------C 5 (Pink Ignition h. )
7 RED / White High Current 12V input------------------------------------C 1 (Red +12V ignition h.)
8 Pink/ White (+) Output to 2nd Ignition /Accessory circuit----------C 6 (White 2nd Ignition h.)
1700G module wires
==============================================================================
No. color : description : connect to :
----- --------- ---------------- -------------------
G 1 red 12V (+) ------------------------------------------- C 1 (Red +12V ignition h. )
G 2 Black (-)-------------------------------------------------- C 2 (-)body
G 3 BROWN / White (-) Panic input ( N/C )
G 4 GREEN/ Black (-) Arm/lock input ------------------------------H2/2
G 5 Violet/Black (-) Key sense input---------------------------C12 ( li.green Keysense )
G 6 Blue/Black (-) Disarm/Unlock driver door---------------H2/4
G 7 RED / White (-) Trunk release input. ( N/C )
G 8 Green (-) Door trigger output ( N/C )
G 9 Gray/Black (+) Dome light Monitor input ----------------C18 ( gray/black Dome Supervision )
G 10 Light Blue (-) Disarm/Unlock all doors input----------H1/6
G 11 Blue (-) Remote start status input----------------Remote aux./1
G 12 Purple J1850 Data output ---------------------------C11 (Pin2 in the OBD2)
Tahoe (Z71)2005 wires
=============================
No. color : description :
----- -------- ---------------------------
C 1 RED +12V ignition harness
C 2 Connected to the body (-)
C 3 RED / white +12V ignition harness
C 4 Yellow Starter- ignition harness
C 5 Pink Ignition- harness
C 6 White Second Ignition harness
C 7 orange Accessory ignition harness
C 8 brown Second Accessory ignition harness
C 9 White Brake light (+)brake pedal switch.
C10 gray/black Parking Lights(-)switch or BCM, brown plug, pin B2
C11 ----------------- Pin2 in the OBD2 connecter
C12 light green Keysense
C13 BLACK / YELLOW to black Horn Trigger (-) switch or BCM, gray plug, pin B9
C14 gray/black driver door trigger at the driver door module
C15 BLACK/ white RF door trigger at the passenger door module
C16 blue/black LR d. trigger pin A3 in the purple plug at the BCM
C17 Li.GREEN/ black RR d. trigger pin A2 in the purple plug BCM
C18 gray/black Dome Supervision - BCM, black plug, pin E
C19 gray Lock Motor 5Wi ! driver door module in door
C20 tan Unlock Motor 5Wi ! driver door module in door