clifford rsx 3.3x trunk disarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107182
Printed Date: June 08, 2024 at 6:20 PM
Topic: clifford rsx 3.3x trunk disarm
Posted By: midnightg35x
Subject: clifford rsx 3.3x trunk disarm
Date Posted: September 02, 2008 at 5:41 PM
I am installing a Clifford RSX 3.3X (Viper 5701) on a 2004 Infiniti G35X. I am having an issue where if I hit the aux button (trunk output), the trunk opens but that instantly triggers the alarm. Is there a configuration menu that I am missing to set the alarm to disarm before activating the trunk output? I realize I could just hit disarm, then the trunk, but I'd think there would be a way to make the system automatically do this. It seems silly that the system wouldn't disarm the trunk pin when you tell it to open the trunk.
Replies:
Posted By: ringojam
Date Posted: September 02, 2008 at 9:06 PM
Its in the programming section .
-------------
Jamaica home of the worlds fastest man.
Posted By: howie ll
Date Posted: September 03, 2008 at 6:39 AM
ringojam is right as usual, change the setting of that aux output to only work when alarm is off. Alternatively,if you can't use RED / white, use another aux and reprogramme the remote control button to operate that aux.
Posted By: midnightg35x
Date Posted: September 03, 2008 at 11:56 AM
howie ll wrote:
ringojam is right as usual, change the setting of that aux output to only work when alarm is off. Alternatively,if you can't use RED / white, use another aux and reprogramme the remote control button to operate that aux.
There is not a programming setting for the dedicated trunk output, just the Aux 1/2/3 channels. I didn't want to hook the trunk into Aux 1/2/3 just because of the fact I'm lazy and don't want to have to do the extra button press of function, then Aux :) I had my window rollup/rolldown programmed into Aux 1 and 2 already though. In good news though, for whatever reason, once I hooked up my key transponder bypass, this issue went away. My alarm doesn't go off when I open the trunk when armed now. Thanks Guys.
Posted By: midnightg35x
Date Posted: September 03, 2008 at 12:45 PM
I guess I have another random question. What way do you guys mount this antenna? The manual doesn't state anything about which orientation it should be. I mounted it parallel to the windshield at the top. So basically the antenna is pointed horizontal with all the cord running along the headliner.
Posted By: megaman
Date Posted: September 03, 2008 at 1:39 PM
I install them pointing down. Compustar ant are run horizontal, but the techs keep telling me to mount the DEI ant up and down.
Posted By: midnightg35x
Date Posted: September 03, 2008 at 2:00 PM
Has anyone tried to see the difference with the DEI ones? If I don't get the range I like, its pretty easy to switch it I guess. Thanks for the info megaman. Does it matter pointed up or pointed down? Or should it just be vertical in some fashion?
|