Question on crimestopper cs-2015-fm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10810
Printed Date: April 27, 2024 at 12:38 PM
Topic: Question on crimestopper cs-2015-fm
Posted By: Raymo
Subject: Question on crimestopper cs-2015-fm
Date Posted: March 12, 2003 at 5:21 PM
Hello, I just installed a cs-2015-fm in my 1993 f-150. It works fine until I drive the vehicle or just turn on the key manually, then the remote start will not start the truck. The door locks work, but no start. If I momentarily disconnect bat. power from #4 bat wire then the remote works fine again, until I drive it. Its as if I need a on/off switch on bat. power to reset brain every time I park. Any suggestions out there? Thanks Raymo
Replies:
Posted By: Velocity Motors
Date Posted: March 12, 2003 at 5:38 PM
When you say that the remote start does not start the truck do you mean that it tries but fails or does it just turn the lights on and then nothing ? No starter engagement or anything ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Two_Cold
Date Posted: March 12, 2003 at 6:41 PM
The kit comes with a relay and a harness for the relay. Recheck the connections for this relay harness. The relay is the starter disable.
Posted By: Raymo
Date Posted: March 12, 2003 at 7:30 PM
Thanks for the quick reply. The remote does nothing, no click, no lights, except the door locks still work. Untill I disconnect the #4 bat. wire momentarilly, then it starts perfect as many times as you want, until I turn on the key to drive and shut it off. I don't have a starter disable. Thanks Raymo
Posted By: Raymo
Date Posted: March 13, 2003 at 4:02 PM
Velocity Motors wrote:
When you say that the remote start does not start the truck do you mean that it tries but fails or does it just turn the lights on and then nothing ? No starter engagement or anything ?
Posted By: nubiannupe
Date Posted: March 14, 2003 at 4:21 PM
For some reason, it sounds like you're getting the wrong 12v source. My thinking would be to get a different 12v source and test it again... I know most systems say get the 12v from the battery directly and I realize that it's not always practical to do that, but you might want to start there. I've got the same system and went directly to the battery, even though I could've gotten power from the ignition harness.
|