Print Page | Close Window

autopage transmitter not receiving

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108235
Printed Date: June 10, 2024 at 1:44 PM


Topic: autopage transmitter not receiving

Posted By: sci_tx_on
Subject: autopage transmitter not receiving
Date Posted: October 18, 2008 at 5:40 PM

Hi everyone. I have an AutoPage RF420. I was trying to install an LED scanner today and accidentally cut the three wires that goes to the 2-way antenna! I re-wired them and was able to lock and unlock my car with my LCD transmitter, but my transmitter would not update the status! In other words, when my car is locked or the alarm goes off, the icon on my transmitter doesn't show it is locked or the alarm has gone off. PLEASE HELP!

Thanks,
Lewis



Replies:

Posted By: sci_tx_on
Date Posted: October 18, 2008 at 8:01 PM
Nevermind. Got it fixed. Turns out, when I cut the antenna wires, it must have short-circuited something in the brain. I swapped the brain out with another and it works now!


Print Page | Close Window