2000 pontiac grand am, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108903
Printed Date: June 08, 2024 at 2:02 AM
Topic: 2000 pontiac grand am, remote start
Posted By: oldsmobile94
Subject: 2000 pontiac grand am, remote start
Date Posted: November 13, 2008 at 9:24 PM
i have a 2000 pontiac grand am an wanna finish the remote starter all i need to do is program the bypass unit its a 556l and the instructions got misplaced but i think someone shot them out on me. so if anybody could help me out an tell me how to program the unit or a link to to where i can get the instuctions from i'd appreciate it. thanks.
-------------
TK
Replies:
Posted By: chriswallace187
Date Posted: November 13, 2008 at 9:57 PM
Here - from Bypasskit's site. ------------- C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
Posted By: oldsmobile94
Date Posted: November 14, 2008 at 9:29 PM
thanks
-------------
TK
Posted By: oldsmobile94
Date Posted: November 15, 2008 at 2:45 PM
i have a clifford matrix 3.2 installed on my 2000 pontiac grand am an the bypass unit is programed an i have the correct wires for the remote start i double checked them but my problem is i cant get it to remote start and i extended the crank time, switched it from tach to voltage and then even swtiched it from high-voltage check to low-voltage check. now im just confused right now cause it should be working. the remote start engages and the engine cranks but won't start. any help would be appreciated.
-------------
TK
Posted By: soundnsecurity
Date Posted: November 15, 2008 at 4:49 PM
are you sure you have all of your ignition and accessory wires? check for a heavy gauge white or brown wire that might need to be powered up for it to start.
|