Print Page | Close Window

93 nissan maxima door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10892
Printed Date: October 31, 2024 at 6:30 PM


Topic: 93 nissan maxima door locks

Posted By: nubiannupe
Subject: 93 nissan maxima door locks
Date Posted: March 14, 2003 at 3:22 PM

Heya,

I'm currently putting in a Crimestopper CS-2015FM alarm/remote start on my 93 Maxima, and here's my dilemma:

I'm trying to wire the door locks for driver's door unlock priority and am having the hardest time finding the driver's door motor wire. I'm fairly certain that I've found it (two 14/16ga brown wires that are neg. at rest, but 12v when I hit unlock), but I'm curious if I can use only one of these wires with my relay or is it necessary to use both wires?

The installation instructions aren't really clear on this, and I wanted to get some clarification from anyone that's familiar with this configuration. Thoughts anyone???



Replies:

Posted By: nubiannupe
Date Posted: March 14, 2003 at 4:33 PM
ttt




Posted By: draasch
Date Posted: March 14, 2003 at 7:35 PM
Constant 12 volts WHITE/ RED OR WHITE IGNITION SWITCH HARNESS
Ignition 12 volts BLACK/ WHITE OR WHITE/ GREEN - IGNITION SWITCH HARNESS
Starter BLACK / YELLOW OR WHITE/ BLUE - IGNITION SWITCH HARNESS
Dome Light ORANGE / BLACK (-) DRIVER KICK PANEL *
Trunk Pin Switch PINK/BLACK (-) DRIVER KICK PANEL *
Parking Lamp RED / YELLOW (+) HEADLIGHT SWITCH OR STEERING COL HARN
Power Lock GRAY/RED DRIVER KICK PANEL OR AT DOORLOCK
Power Unlock LIGHT BLUE TIMER TO RIGHT OF STEERING COL.**#201

#201- See Negative Pulse Door Lock Diagram. * Also Found At Theft Warning Module To The Left Of Steering Column ** From Installer:Wires Are Found In Large Harness In Kick Panel.


Drv Door Unlock BROWN IN DRIVER KICK PANEL




Posted By: nubiannupe
Date Posted: March 15, 2003 at 1:42 PM
Thanks for the reply, but my question is since I found two brown wires, which do I need to use? Keep in mind, both wires test the same...





Print Page | Close Window