Print Page | Close Window

00 Prelude need help installing viper 790

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10908
Printed Date: May 18, 2024 at 9:44 AM


Topic: 00 Prelude need help installing viper 790

Posted By: rmtphan
Subject: 00 Prelude need help installing viper 790
Date Posted: March 15, 2003 at 12:35 AM

Hi i'm trying to install a viper 790vx alarm into and i'm having problem with three things.  One is the door trigger for it's working.  Is the wire really a WHITE/ back wire in the passanger kick panel?  Two how do I hook up a remote start for an stick shift?  I heard that i have to bypass the crutch.  How do I do that.  Third for the starter kill there are three wire a yellow and it look like it's suppose to go to the Ignition 1, a Green and it look like it's suppose to go to the ignition 2, Black wire look like it's suppose to go to the starter.  Is that correct?  Can I call up anybody if I need help.  Thank you for your time

Richard




Replies:

Posted By: 2vmodular
Date Posted: March 15, 2003 at 1:07 AM
The remote start function of the 790XV is not compatible with "stick shift" vehicles as evidenced by this excerpt from the installation manual:

"IMPORTANT! This product is designed for fuel-injected, automatic transmission vehicles only. Installing it in a standard transmission vehicle is dangerous and is contrary to its intended use."


Print Page | Close Window