Print Page | Close Window

unit won’t go into transmitter programmin

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110075
Printed Date: May 14, 2024 at 6:23 PM


Topic: unit won’t go into transmitter programmin

Posted By: tbird2340
Subject: unit won’t go into transmitter programmin
Date Posted: December 27, 2008 at 10:39 AM

I'm about to flip my lid.. I just got an RMA'd Crimestopper RS1704TWII back and they didn't program the remotes.. No big deal.. I can program them..

I try to go into transmitter programming (ground hood pin, turn key to ON position, press program button FOUR times) and it will NOT give me the confirmation honk / flashes.. I can go into OPTION programming fine (same as above but 5 program button presses).. I am so f'in mad I can't even stand it..

Does anyone have any ideas or did these monkeys send me a broken unit back?

This is the third time I've had this car because of issues. Someone please... Tell me there is a solution.



Replies:

Posted By: tbird2340
Date Posted: December 27, 2008 at 11:11 AM
Well thank God I had another unit in stock.. Turns out they either sent the wrong type of antenna or a defective one.. This was on an RMA.. I had a broken unit to begin with.. Sent it back, and they sent me back one that didn't work..

Stay FAR FAR away from these monkeys AKA Crimestopper. I have no idea how they've been in business for 20+ years.. They absolutely SUCK. Oh yea.. And the broken "fixed" one they sent me back was the 4th unit in a row I had go bad..





Print Page | Close Window