prostart ct 3200 start failure

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110664
Printed Date: May 28, 2024 at 1:16 PM

Topic: prostart ct 3200 start failure

Posted By: mike31
Subject: prostart ct 3200 start failure
Date Posted: January 14, 2009 at 7:16 PM

HI EVERYBODY
I just joined this great forum. I bought a car 1999 daewoo and remote starter worked fine as my friend tried it.After few days later when I did try to start the car for the first time it just failed but I could hear relay is activating but not any light flashing.The lock unlock feature works fine but as I mentioned no start at all and no engagement of starter relay.I think I messed it up as playing with ignition switch and remote transmitter. Please let me know what to do since this is my first time considering never had a car with remote starter before.
Highly appreciated mike31

Replies:

Posted By: xghost
Date Posted: January 15, 2009 at 10:47 PM

Your probably stuck in valet mode. Im pretty sure its 5 times ignition on and off to exit out of valet.

That is if my memory serves me right.

Posted By: monty_77
Date Posted: January 16, 2009 at 1:24 AM

Straight out of the user guide

To put the system into Valet Mode
• To put the system i n t o Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the IGNITION/RUN and OFF positions.
The parking lights will flash three times.
b. Turn the ignition OFF.
The LED on the antenna will come ON solid to indicate that the vehicle has successfully
entered Valet mode.
To put the system out of Valet Mode
• To put the system o u t o f Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the IGNITION/RUN and OFF positions.
The parking lights will flash twice.
b. Turn the ignition OFF.
c. The LED will be OFF.
The system will warn you if someone attempts to remote start the vehicle while in Valet Mode:
The parking lights will:
Turn ON then OFF; then
Flash twice.

Posted By: mike31
Date Posted: January 17, 2009 at 1:02 AM

Thanks guys for the reply I will try it later based on the posted instruction and I will let you know the results Thanks again. Mike

Posted By: mike31
Date Posted: January 17, 2009 at 7:24 PM

HI GENTS
I did carry out the above mentioned procedure a few times and it WORKED.
Thanks a lot. Mike

Posted By: xghost
Date Posted: January 17, 2009 at 9:55 PM

Im glad!