08 ford fusion
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110782
Printed Date: May 18, 2024 at 4:12 PM
Topic: 08 ford fusion
Posted By: ziggyb222
Subject: 08 ford fusion
Date Posted: January 18, 2009 at 7:29 PM
Idid a 08 Ford Fusion today with a Ultra Start. Used the XK04 with the PKFORD software. I cannot get that module to program. I have read about some other troubles with the newer Fords. Any ideas what I might be doing wrong or if any one has had the same trouble how did you correct it.. Thanks in advance...
Replies:
Posted By: dre187
Date Posted: January 18, 2009 at 9:03 PM
i have tried using the XK04 on 2 different 08' ford with no success. 07' models work fine. One was a lincoln town car and other a f-150. i'm not sure why it doesn't work. there is an addendum from DEI to add a relay to ground the TX wire on the module, although this is to prevent the module from sometimes losing memory. On any new fords now, i just use KEY-OVERIDE ALL from Fortin. Connections are essentially the same and i have never had any problems.
Posted By: dtk1
Date Posted: January 18, 2009 at 10:10 PM
you need to flash the module to PKF3 1.00 not the original one thats why it does not work
|