ford pats bypass on 99 mustang
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11148
Printed Date: May 15, 2024 at 2:07 AM
Topic: ford pats bypass on 99 mustang
Posted By: gpgtp00
Subject: ford pats bypass on 99 mustang
Date Posted: March 19, 2003 at 7:07 PM
guys.. please help.. i cannot get this 555f to work for this remote start. Its as if it wont program! any idea what to do?? Thanks
Replies:
Posted By: Velocity Motors
Date Posted: March 19, 2003 at 7:49 PM
Do you have 2 active programmed keys ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: gpgtp00
Date Posted: March 20, 2003 at 3:14 PM
yup. the instructions kinda confuse me too.
Posted By: Velocity Motors
Date Posted: March 20, 2003 at 3:59 PM
Did you make sure you used a GROUND OUT WHEN RUNNING WIRE as your trigger wire for the module ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: gpgtp00
Date Posted: March 20, 2003 at 8:08 PM
sure did.. i ops checked it and everything. I hooked the red wire to the constant on the column, then the blue wire to the negative output and remote started it to see ifi it was activating the module. It does bc i can hear and feel the internal relay kicking over. Then if im understanding the instructions correctly, im to... first, take the first key and turn to the RUN position, wait for the THEFT light to go out, stick teh 2nd key, same process, then hold the capsule up to the ignition adn remote start it.Sound right??
Posted By: JWorm
Date Posted: March 20, 2003 at 9:56 PM
You have to be quick....
Key one on until light goes out, key off, then quickly
Key two on until light goes out, remove key, then quickly
Place module into key cylinder (where you would put the key), and activate remote start. Security light should go on solid and car should start.
Place module on side of key cylinder and secure. Test until you find a spot that works, put column back together.
Posted By: gpgtp00
Date Posted: March 21, 2003 at 5:57 AM
i see what your talking about.. my problem is then that the remote start isnt activating quick enough. Its delaying too long. All that has to be done within 10 seconds right?
Posted By: 2vmodular
Date Posted: March 21, 2003 at 11:52 PM
Do realize that you can manually engage the 555f? Just jump the blue wire to a constant ground source such as a metal dashboard support bracket.
Ford dealers also sell a bypass module and it's got a ring that fits tightly around the key cylinder antenna, so it will always work right the first time & won't move around like the dei 555f will. The part # is 1l3z-19g365-ab
|