I wired the system and set up for second starter wire using options menu. I try to remote start and get nothing. the relays click several times in the alarm box but no dash lights no cranking. the second ignition i than connected to the first with a diode and still arrived with the same result. i cannot get past this point.
-------------
Bubisamongus !
If it was the second start problem the dash lights would at least light up.
So . . .
Programmed for automatic mode (menu 3/ item 1)? It comes manual tranny mode by default.
BLACK/ white neutral to ground?
I suggest you program "engine checking" to off (menu 3 / item 2) for troubleshooting sake.
Bypass module? Put wiring back to OEM and try with key in barrel.
Disconnect brake and hood inputs (until we get it going).
How many park light flashes when it tries to start?
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.
bubisamongus wrote:
I wired the system and set up for second starter wire using options menu. I try to remote start and get nothing. the relays click several times in the alarm box but no dash lights no cranking. the second ignition i than connected to the first with a diode and still arrived with the same result. i cannot get past this point.
you have to use realys in this vehicle you cant just diode it
the largest diode will only pass 3 amps you need almost 15-20 in toyotas so its proably not getting the power it needs
you have to use two relays for ignition and start
if you have programable output use that for the ignition and wire up a relay for start
87+85 get 12volts
86 ground out when running
30 is to your second start wire
i wont be the bypass by what your telling if it was at least it would crank the starter and not turn over
so just check your ignition wires
-------------
"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd
all run around in a darkened room munching pills and listening to repetitive
music."-Kristian Wilson, Nintendo Inc.