95 integra rs and inwells alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112967
Printed Date: June 09, 2024 at 11:59 AM

Topic: 95 integra rs and inwells alarm

Posted By: rsndic
Subject: 95 integra rs and inwells alarm
Date Posted: April 07, 2009 at 3:37 AM

Hey Guys/Gals,

I have a 95 Integra Rs, with no power door locks. I also wanted to install the Inwells car alarm system (been sitting in my room for about 2 years, Piece of doodie) with LCD pager and remote start! Now my question is, do I need to install power door locks or in the instructions the Central control lock Crods wires to get my remote engine to start or even get the alarm to work? Pretty much, I do not care about Keyless entry. If I can't get the remote engine to work, love it! but Since im lately adding a doodie load to the car and parking in school 8 hr days, I need an alarm for some personal insurance and the Lcd pager!

Any help or input would be Great!

ThanX

-------------
Hip Hop For Life!

Replies:

Posted By: KarTuneMan
Date Posted: April 07, 2009 at 10:30 AM

First off.... as you can see, it's NOT a good idea to use the word s**t.

Second... is your can a manual transmission? If your car does NOT have power locks, thats just OK! just don't

forget to lock your doors. It will work just fine... provided it's an automatic..

-------------

Posted By: howie ll
Date Posted: April 07, 2009 at 11:55 AM

So that's what a doodie is. Hi Gary. What are control lock CROD wires?

Posted By: rsndic
Date Posted: April 07, 2009 at 3:47 PM

Yeah, my apologizes for the wording, just frustrated!

It is a Manuel transmission! What do I need to do that is diff from automatic?

Well, for my Teg, ive been reading that people have Negative Touch off with 95 integra!
So this is what is mentioned in the instructions for negative Touch Off, In this order:
orange=has a scissor
White=Close
Yellow=Negative (-)
ORANGE / black=has a scissor
WHITE/ black=open
yellow/black=Negative (-)

I have a 10 pin 10 wire plug!
Colors are in this order:
Purple= high voltage coil (+)
yellow/black=Negative (-) (Control Crod wires)
WHITE/ black=open (Control Crod wires)
ORANGE / black=has a scissor (Control Crod wires)
Yellow=Negative (-) (Control Crod wires)
White=Close (Control Crod wires)
orange=has a scissor (Control Crod wires)
Brown=Directional lamps
Brown=Directional lamps
Yellow= purple to the 85 (Little Black Pin adapter)

I also have a 5 pin, 4 wire plug in this order:
green=hand brake or ground
white=to lock ACC
Orange= (+) brake switch impuit
Blue= (-) door switch input)

My Question now is, do I still need to connect the control crod wires if i don't have the Power locks wires and can just close them off?
-------------------------------------------------------------------
Acura Integra

1994-1995

Alarm and Keyless Entry Wiring Colors and Notes

Function
   Vehicle Color
Location

Constant +12 Volts:
   WHITE
IGNITION SWITCH HARNESS

Starter Kill:
   BLACK/ WHITE
IGNITION SWITCH HARNESS

Ignition +12 Volts:
   BLACK / YELLOW
IGNITION SWITCH HARNESS

Dome Lights/Superv:
   LIGHT GREEN/ RED (-)
BLUE CONNECTOR AT FUSE BOX

OEM Horn:
   BLUE/GREEN (-)
AT RELAY ON LEFT SIDE OF FUSE BLOCK

Power Lock:
   BLACK/ WHITE
IN LARGER OF 2 GRAY CONNECTORS***

Power Unlock:
   BLACK/ RED
BEHIND CRUISE MOD IN DRIVER KICK PANEL

Trunk Release:
   N/A

Alarm Input Wire:
   LIGHT GREEN/ RED (-)
BLUE CONNECTOR AT FUSE BOX

Notes:
** RED / BLACK (+) In 18 Pin BROWN Connector In Driver Kick Panel Can Also Be Used For Parking Lights. *** See Note #201- Negative Pulse Door Lock Diagram.

ThanX for the replies, Much Appreciated it!

-------------
Hip Hop For Life!

Posted By: howie ll
Date Posted: April 07, 2009 at 4:08 PM

You don't need the locking wires, what's a crod?

Posted By: rsndic
Date Posted: April 07, 2009 at 5:33 PM

Im guess the lock crods is just a name from the company or it can be a typo of lock cords! But crods is what is in the instructions...

Thank you very much, I'll be installing the alarm this weekend...hopefully all goes well! :D

-------------
Hip Hop For Life!

Posted By: rsndic
Date Posted: April 08, 2009 at 5:45 AM

It seems this unit will be garbage! Minus well get a system that has good support, Lcd pager, remote Start, And probably power lock converter!

Any suggestions for a system easy to install, and not a pocket breaker? Noob Here!

ThanX!

-------------
Hip Hop For Life!

Posted By: dswift
Date Posted: April 10, 2009 at 12:04 PM

LOL Crods hahaha. wth I wouldnt put that in my DC2. Ahh hell no. Go and spend some money.

-------------
"dont ground out!"

Posted By: rsndic
Date Posted: April 11, 2009 at 4:26 AM

YEah, Will Do! Thinking about the Viper 5900 SST! Should be A good install! and Doing Power lock conversion...might just save the hassle and have the shop do it, then open it up and look at how they did it to understand the wiring and what goes where and why!

Thanx

Dic

-------------
Hip Hop For Life!

Posted By: howie ll
Date Posted: April 11, 2009 at 4:42 AM

I've been thinking, if the installation instructions are that carefully translated, what's the rest of the quality like? posted_image

Posted By: rsndic
Date Posted: April 12, 2009 at 4:39 AM

THis Inwells model is the USA version! so all in proper english and diagrams. some dude/lady on the other post looking for the manuel been telling me that they never had a problem with the unit for 3 years now, until she replaced the battery, basically reconfiguring the remote with the alarm unit, that was it.

-------------
Hip Hop For Life!