clifford c 600 blowing fuses

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113124
Printed Date: May 29, 2024 at 4:21 AM

Topic: clifford c 600 blowing fuses

Posted By: 3002steve
Subject: clifford c 600 blowing fuses
Date Posted: April 14, 2009 at 9:35 AM

i have a concept 600 that randomly started to blow fuses

i spoke to local installer and he got it sent in for repair ...well its still doing the same

i can valet it , lock the car in valet mode ..but when i try to arm it the main fuse blows

ive stripped back the tape and the main power and ground are in good with no signs of chafing , new ring terminals at the battery too

im out of ideas now

Replies:

Posted By: howie ll
Date Posted: April 14, 2009 at 1:27 PM

Try arming it with the siren disconnected, (it unplugs at the brain) I've never seen this problem before but those sirens are prone to internal battery failure and water ingress.

Posted By: 3002steve
Date Posted: April 14, 2009 at 2:01 PM

good idea , i'll try that

Print Page | Close Window