Print Page | Close Window

2002 Toyota Avalon Factory Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11413
Printed Date: June 08, 2024 at 9:15 PM


Topic: 2002 Toyota Avalon Factory Alarm

Posted By: luvs2div
Subject: 2002 Toyota Avalon Factory Alarm
Date Posted: March 24, 2003 at 9:39 PM

How do you bypass the factory alarm on the Avalon.  Installed a RS 901 IV Remote Starter and the alarm goes off.  There is no disarm wire coming from the key cylinder in the door as some wiring suggests.  The reverse polarity door locks wired at the ECU next to the fuse box locks and unlocks the doors ok but does not arm or disarm the alarm.  There are no blue wires in the door that have anything to do with disarming the alarm.  Door unlock does not shut alarm off after alarm is set (30 seconds after lock).  You then attempt to start car or unlock with remote, when the alarm is set, and the alarm goes off.  SEND HELP.

Thanks....R




Replies:

Posted By: draasch
Date Posted: March 25, 2003 at 6:26 PM
this is the info that i have.
can you find the factory alarm box??
if so, look in the harness.
test wire with a meter before you hook up to it


OEM Alarm Disarm BLUE (-) DRIVER DOOR

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: JWorm
Date Posted: March 25, 2003 at 8:29 PM
You need to hook up to the factory key sense wire to disarm the alarm during remote start.

To arm and disarm the alarm with locks download the following:
https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdf




Posted By: mackadilly
Date Posted: May 01, 2003 at 8:04 PM
After having the Hornet professionally installed in a 2003 Avalon, there is a noticable cliking sound coming from the lower driver's side area.

The remote start would shut down when you insert the key and turn it to the on position.

KM





Print Page | Close Window