2009 caravan ignition.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114936
Printed Date: May 19, 2024 at 11:28 PM
Topic: 2009 caravan ignition.
Posted By: Memphisman
Subject: 2009 caravan ignition.
Date Posted: July 08, 2009 at 6:12 AM
I am going to be installing an incar GPS tracking device in an 09 Grand Caravan. It needs to be hooked to a +12V constant, ground, and ignition wires. According to my wiring diagram there is no ignition wire. Any suggestions on where to connect the ignition wire to?
Replies:
Posted By: Mike M2
Date Posted: July 08, 2009 at 6:53 AM
Possibly find an ignition powered fuse in the box, or an ignition coil...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: Chris Luongo
Date Posted: July 08, 2009 at 9:12 AM
There's a link in this post that shows an install diagram with constant and ignition at the ignition switch.
https://www.the12volt.com/installbay/forum_posts.asp~TID~114815~PN~1
Posted By: howie ll
Date Posted: July 08, 2009 at 10:13 AM
You could use any ign or even acc for a tracking device, the ign. inout isn't actually doing anything apart from telling the unit the ignition is on, the draw as measured on one in the UK was 3milliamps, pretty safe for any live via key wire. If your unit doesn't have a fuse on the ignition wire, assume the same case.
|