Shock Sensor and Remote Start Problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11536
Printed Date: May 29, 2024 at 3:33 AM
Topic: Shock Sensor and Remote Start Problem
Posted By: Sebastian018
Subject: Shock Sensor and Remote Start Problem
Date Posted: March 27, 2003 at 3:18 PM
HI, I have a prestige APS-785 ,and When the remore star is on, (engine running) the alarm go on for the shock sensor. I need to know how to do it with the relay.
thank you
Replies:
Posted By: jrilla
Date Posted: March 29, 2003 at 10:29 AM
I am not sure that this is your only option, but if you went that route, you could just set up the relay like this:
Pin 85 to ground out when running from RS
Pin 86 to 12v+
Pin 30 to one side of the cut wire from shock sensor
Pin 87a to the other side of the cut wire
Pin 87 to nothing
You can use either the 12v power supply wire to shock sensor, or the ground wire or the trigger wire. if the sensor is 2 stage like most are, you would want to use either the power or ground wire.
Some alarms bypass the shock sensor when remote starting. Or you may be able to just turn down the sensitivity.
-------------
J Rilla
Owner/Installer
Posted By: Sebastian018
Date Posted: April 12, 2003 at 10:48 PM
What could be another option?
Posted By: Velocity Motors
Date Posted: April 13, 2003 at 7:50 AM
Lower your shock sensitivity.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|