karr alarm 4040a

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115639
Printed Date: May 29, 2024 at 6:17 AM

Topic: karr alarm 4040a

Posted By: jcaxico
Subject: karr alarm 4040a
Date Posted: August 13, 2009 at 10:09 PM

What is the best way to hook up a newly installed camper shell to existing alarm system?
I have a 2005 Tacoma with a dealer installed Karr 4040A alarm.
I think that I would probably have to put a grounding switch that would ground when the tailgate is open but where is this wire connected to the alarm brain?
Thanks.

-------------
jcaxico

Replies:

Posted By: i am an idiot
Date Posted: August 13, 2009 at 10:54 PM

Do you have a hood pinswitch installed? Or any sensors, glass break, shock? If so, either of those wires will be a good candidate.

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: mikvot
Date Posted: August 13, 2009 at 11:14 PM

Hook the switch up to the dark green wire on the main harness of the brain. It is neg. input.

Posted By: jcaxico
Date Posted: August 16, 2009 at 11:41 AM

Thank you very much for the ideas, I will try the all.

-------------
jcaxico

Print Page | Close Window