1996 chrysler town and country
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11622
Printed Date: May 18, 2024 at 9:47 AM
Topic: 1996 chrysler town and country
Posted By: Parkdaddy02
Subject: 1996 chrysler town and country
Date Posted: March 29, 2003 at 10:59 PM
i was wondering if there is any way to disconnect the factory alarm on this vehicle. It is malfunctioning and goes off whenever you lock the vhehicle. It usually goes off for about 15 minutes and there is no way to stop it besides disconnecting the battery. If there is a mod i can unplug or a wire i can cut or ground i would appreciate the help.
-------------
Thanks,
Eric
Replies:
Posted By: 2vmodular
Date Posted: March 30, 2003 at 12:07 AM
The factory alarm is part of the body control module (BCM). If you unplug the BCM, the headlights, power door locks, courtesy lamps & windshield wipers will become inoperative.
You could purchase & install a bcm from a caravan without the factory security system, but you'd also have to change the door lock switches as they use a different resistance for the multiplex bus.
|