1999 honda crv remote start/ alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116676
Printed Date: June 01, 2024 at 1:02 AM

Topic: 1999 honda crv remote start/ alarm

Posted By: drzchulo147
Subject: 1999 honda crv remote start/ alarm
Date Posted: October 02, 2009 at 10:39 PM

I will be installing a Viper 5701 (PINK) posted_image

for my sister this weekend. She has a 1999 Honda CRV. After doing some research in the help I see that I will need two relays for the lock and unlock since the factory ones arent strong enough in this SUV. Besides two STDP relays do I need anymore relays for the remote start function or anything else (trunk trigger??) ?

Also any hints or tips for this particular SUV?

Replies:

Posted By: JWorm
Date Posted: October 02, 2009 at 10:52 PM

If it has a factory alarm you could use a relay to interrupt the ignition feed to the OEM alarm. There are ways around that though.
If you want to have domelight supervision then that would probably require a relay too.
Trunk release is (+) trigger so that would require a relay.
Other than that, fairly easy vehicle to do.

Posted By: drzchulo147
Date Posted: October 02, 2009 at 11:05 PM

Thanks Bud

Print Page | Close Window