power supply for canmax

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116788
Printed Date: May 21, 2024 at 7:45 AM

Topic: power supply for canmax

Posted By: bdl666
Subject: power supply for canmax
Date Posted: October 07, 2009 at 3:05 PM

Does anyone have the pinout for the power supply you use in conjunction with the xkloader to program expresskit's dlpk and canmax units?

We have a lot of this units that were purchased last year. The owner got them but didn't get the power supply for them. Now he doesn't want to pay for it because when he got them, our distributor didn't mention the fact that we needed it.

Any help will be appreciated.

-------------
ieSpell rocks.

Replies:

Posted By: yimke
Date Posted: October 07, 2009 at 4:08 PM

Just hook it up to a cordless drill battery. 12v preferably.

Posted By: 91stt
Date Posted: October 07, 2009 at 5:21 PM

what do you mean power supply?
are you referring to the D2D cable?

Posted By: bdl666
Date Posted: October 08, 2009 at 10:40 AM

91stt] wrote:

what do you mean power supply?
are you referring to the D2D cable?

No the this units require an additional power supply in order to be flash by the Xkloader. I just need to know the voltage necessary to power them and where which pin to provide it. I have the D2D cable and the Xkloader.

yimke

What do you mean by power it with a battery? Is it just a matter of powering the 12v and ground leads on the main harness?

-------------
ieSpell rocks.

Print Page | Close Window