Print Page | Close Window

2010 shelby gt500

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116913
Printed Date: October 31, 2024 at 6:15 PM


Topic: 2010 shelby gt500

Posted By: TooDark
Subject: 2010 shelby gt500
Date Posted: October 12, 2009 at 5:09 PM

Any one have a wiring diagram for this car. I have check all my software and links with any luck. Does anyone know if it is the same as a "regular" mustang? I have to install tint/PPF and an alarm into this bad boy this week and nothing seems to be going my way so far with the car.

Thanks
Too Dark



Replies:

Posted By: beegbie
Date Posted: October 12, 2009 at 7:29 PM
I've put gps tracking devices in 2009's and it looked the same as a regular mustang to me. I also had a dealer inquire about an alarm but the car had a factory alarm with proximity sensors in the overhead console so I did't see the point in adding another alarm.




Posted By: TooDark
Date Posted: October 12, 2009 at 8:11 PM
Guess I will pull up the "regular" mustang and see if it is the same.




Posted By: jim hunter
Date Posted: October 12, 2009 at 8:34 PM
its a regular mustang as far as wiring/electrical, the shelby gt500 designation is a trim code for performance and ride/visual enhancements, alarm wiring will be sam as a std 2010 mustang




Posted By: 01trublugt
Date Posted: October 13, 2009 at 8:32 AM

All electrical wiring will be the same as the normal Mustang. The only wiring that is different would be the engine and tranny harness.





Posted By: TooDark
Date Posted: October 13, 2009 at 2:46 PM
Cool thanks!





Print Page | Close Window