Print Page | Close Window

clifford intelliguard 7000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117030
Printed Date: May 28, 2024 at 11:48 PM


Topic: clifford intelliguard 7000

Posted By: rhillaker
Subject: clifford intelliguard 7000
Date Posted: October 17, 2009 at 1:05 PM

What and where is the main fuse to diasble the Clifford Intelli Guard 7000 alarm? Could use your help.

-------------
R.P. Hillaker



Replies:

Posted By: scirocco16v
Date Posted: October 17, 2009 at 3:26 PM
if iit was done correctly it should be a 5 amp under the hood near the battery.  Just in case you did not know without that fuse in the car will not start or crank.  The immobilization circuits need to be put back together when pulling that fuse in order to drive the car


Print Page | Close Window