viper 771xv not cranking 2009 avenger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117384
Printed Date: June 07, 2024 at 12:37 AM

Topic: viper 771xv not cranking 2009 avenger

Posted By: buddahluvaz
Subject: viper 771xv not cranking 2009 avenger
Date Posted: October 31, 2009 at 6:58 PM

I am trying to install a viper 771xv on a 2009 dodge avenger. I have installed all the wiring and the pkucg2x module. i tried to program the module according to the directions. The alarm works but when i go to start the vehicle the system tries to start but the starter wont crank and the remote will flash the yellow light 3 times. i tried to put the key in the ignition and start it to see if thebypass is not working and still no cranking. The diagnostics do not seem to be working either. The led will not flash when i try to put it into dianostics. any sugestions.

Replies:

Posted By: t&t tech
Date Posted: November 01, 2009 at 1:51 PM

Have you disconnected the bypass and then inserted the key and tried remote starting?

Posted By: chadwa2003
Date Posted: November 01, 2009 at 6:47 PM

It sounds to be connection related. How did you wire the bypass module? Did you verify that the immobilzer programmed correctly? ie. starting the vehicle with the chip removed from the key using the bypass in place of the chip