giordon a f06 wiring 99 ram 1500

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117522
Printed Date: June 09, 2024 at 2:49 AM

Topic: giordon a f06 wiring 99 ram 1500

Posted By: ajtech81
Subject: giordon a f06 wiring 99 ram 1500
Date Posted: November 06, 2009 at 5:43 PM

hi, i tried to install a giordon a-f06 on my 99 dodge ram 1500 and the system only clicks the relay, nothing more, i will like to see if you guys can healp me.
here are the wires that i conect.
12v power red to red
starter blue to yellow
brown (White on the wiring harnes from the unit) to dark blue
acc green to BLACK/ white
tach purple to BLACK/ grey (only black at the coil)
brake orange to to WHITE/ tan
lights bronw to BLACK / YELLOW
and i cant get the unlock/lock to work
unlock WHITE/ black to pink/purple
lock white to ORANGE / purple
that is as far i got nothing work right.
relays work, itried with the remote and the all work fine.
but no start nor lock or unlock
here are some pics of the wiring pics on my giordon system. posted_image

please let me know guy, any healp will be apreciated.
thanks

Replies:

Posted By: ajtech81
Date Posted: November 06, 2009 at 5:52 PM

hi, guys my e-mail is ajtech81@gmail.com.
thx

Posted By: howie ll
Date Posted: November 07, 2009 at 1:04 AM

One piece of advice, bin it. Anything that asks you to go to the oil pressure switch instead of proper tach WILL NOT WORK. Once spent 2 days with one of these bits of rubbish, ended up making the customer throw it away and install a Clifford system. There is also no GWR status to run a by-pass if needed. Also won't work with a manual transmission.

Posted By: ajtech81
Date Posted: November 07, 2009 at 9:22 AM

so, you think that i shure trash the unit?.
no on making work?.
what's a GWR status.?
any ideas guys.

Posted By: howie ll
Date Posted: November 07, 2009 at 11:57 AM

A "proper" R/S wil put out a GWR, AKA Status output, which goes to ground as the remote start initiates and stays grounded for the R/Ss duration, it's used mainly to energise by-passes for ignition imobilisers.

Posted By: zygap
Date Posted: January 21, 2010 at 10:05 PM

Looks , like you've connected wrongly "(White on the wiring harnes from the unit) to dark blue " instead of to the pink one (ignition).