508d

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117639
Printed Date: May 28, 2024 at 8:45 PM

Topic: 508d

Posted By: argetni
Subject: 508d
Date Posted: November 10, 2009 at 8:43 PM

Hi, i was wondering was the 508d a direct plug in play with the clifford 50.5x? if not than how do i install it?

Replies:

Posted By: howie ll
Date Posted: November 11, 2009 at 12:52 PM

There should be a spare port marked MUX. If not and there's an external shock sensor, parallel it with that but diode separate (bands away from alarm) the green and blue, third method, separate ground and power, join green and blue together and again via diode saparation, join to the blue trunk or hood trigger wire.

Posted By: argetni
Date Posted: November 19, 2009 at 5:45 PM

bump. i try looking for a port but it doesnt have one for it to plug in. do you any pictures of it?

Posted By: howie ll
Date Posted: November 19, 2009 at 6:01 PM

The shock sensor port is next to the antenna plug, at least that's what it shows on your instalation guide.

Print Page | Close Window