manual sought, pursuit pro 9243
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117642
Printed Date: May 14, 2024 at 6:01 PM
Topic: manual sought, pursuit pro 9243
Posted By: danlins
Subject: manual sought, pursuit pro 9243
Date Posted: November 10, 2009 at 10:26 PM
Looking for an installation manual or live link for a Audiovox Pursuit PRO9243. Googled it, to no avail.
Thanks,
danlins
-------------
Dan L
Replies:
Posted By: i am an idiot
Date Posted: November 10, 2009 at 10:57 PM
Following is for the 9232, the wire colors should be the same. https://www.the12volt.com/installbay/file.asp?ID=252
Posted By: danlins
Date Posted: November 10, 2009 at 11:17 PM
Thanks.... I for one don't think you're an idiot.
There's a 4 wire connector on the 9232 that does not exist on the 9243, for trunk shunt and who knows what else. Not gonna worry about 'em.
dl
-------------
Dan L
Posted By: Chris Luongo
Date Posted: November 11, 2009 at 9:09 AM
If you're curious, that extra plug with trunk shunt and other wires, that's because the 9232 is designed to work using the car's factory remotes. Those wires tie into the car's doorlock circuit, so the alarm "knows" when the user is locking or unlocking with the factory remotes.
Since your 9243 uses its own remotes, that's why those wires are not included.
Posted By: flhunter
Date Posted: August 05, 2010 at 10:48 AM
Avox just sent me the install and owners manuals.
I will post them in the members downloads area for all to share.
Regrettable this did not help in my getting the chirps to work during arm/disarm.
Posted By: lectricguy
Date Posted: August 07, 2010 at 6:02 PM
flhunter-
Did you attempt turning chirps on (top section of the owners manual, page 5)? The chirps may just be turned off, and the procedure in the manual may allow you to turn the chirps back on. ------------- Lectric Guy
Posted By: flhunter
Date Posted: August 08, 2010 at 1:19 AM
I got it working. Had to feed the siren with a relay from the alarm output.
|