wait to start on python

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117800
Printed Date: May 19, 2024 at 11:41 AM

Topic: wait to start on python

Posted By: ceasar326
Subject: wait to start on python
Date Posted: November 17, 2009 at 12:04 PM

Ima be working on a 2006 Chevy silverado 3500 Diesel. This will be my first time hooking up one on a disel truck. Im going to use, Python 2-Way one button remote start 4203P with also 528t pulse timer to make it simple. My question is what wire to use to hooke up from the python to the 528T to work as a wait to start. Thanks Cesar

Replies:

Posted By: howie ll
Date Posted: November 17, 2009 at 1:24 PM

You should be able to programme the R/S for diesel, you wont need the timer.

Posted By: dvaldez0989
Date Posted: November 17, 2009 at 2:27 PM

on the remote start menu, feature 9 option 2. this is 15 second delay. This will turn ignition on so it will warm up the glow plugs and then will start after 15 seconds.

Posted By: ceasar326
Date Posted: November 17, 2009 at 9:10 PM

Thanks for the replys. I was reading the manual and looks like it does not a wire but has a built in timer for that. I'll use bit writer to program thanks everyone.

Print Page | Close Window