clifford remote start, prestige alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117959
Printed Date: June 09, 2024 at 6:53 AM

Topic: clifford remote start, prestige alarm

Posted By: supafly941
Subject: clifford remote start, prestige alarm
Date Posted: November 23, 2009 at 4:24 PM

I have a clifford remote start in my truck without alarm, I have a prestige alarm that I would like to put in my truck. I am wondering if I can use the "channel 3 negative latching output" on the prestige alarm to start the truck with the clifford remote start (like hook it up to the -ignition input on the clifford), any input would be greatly appreciated.

Replies:

Posted By: howie ll
Date Posted: November 23, 2009 at 4:53 PM

Not if it's an Intellistart lV you can't that takes a data input and only works with a G4/5 Clifford.

Print Page | Close Window