98 navigator
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118915
Printed Date: June 07, 2024 at 5:23 PM
Topic: 98 navigator
Posted By: jmw505
Subject: 98 navigator
Date Posted: December 29, 2009 at 9:30 AM
i have a 98 navigator that the bypass will not program it is a xpress kit PKALL i have all the wires hooked up as the instructions say
the remote start is a crimestopper and the remote start works it is just down to the bypass
Replies:
Posted By: Twelvoltz
Date Posted: December 29, 2009 at 11:35 AM
So the vehicle remote starts fine if you leave a key in the cylinder?
Did you verify that all the wires to the PKALL are working as they should? The ignition, ground, ground when running, and constant hot all work they way they should? Have you tried reversing your TX and RX wires?
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: zerepdivad
Date Posted: December 29, 2009 at 1:56 PM
What colors did you use for the tx and rx wires on the car? Do both of your keys say ford/mercury on them or is one of them blank with no name on it?
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: tommy...
Date Posted: December 29, 2009 at 3:47 PM
Maybe rx and tx are reversed...?
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: jmw505
Date Posted: January 05, 2010 at 9:04 AM
well i tried filping the Rx Tx wires and all the wires were hooked up right so i just threw the bypass out and did it old school lol thanks for the help though and i did have 2 programed keys
Posted By: zerepdivad
Date Posted: January 05, 2010 at 9:36 PM
^ you likely had a "cloned" key. I've came across that many times.
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
Posted By: jmw505
Date Posted: January 08, 2010 at 9:57 PM
yea or there was to many keys programed to that car so i just took one from them lol
Posted By: ace69247no13
Date Posted: January 08, 2011 at 10:48 AM
I am having nearly the same issue with the pkall on a 98 navigator. my problem is the plug in the vehicle doesn't match the one shown in the install guide. does anyone know the color of the tx rx wires?
Posted By: zerepdivad
Date Posted: January 08, 2011 at 12:13 PM
ace69247no13 wrote:
I am having nearly the same issue with the pkall on a 98 navigator. my problem is the plug in the vehicle doesn't match the one shown in the install guide. does anyone know the color of the tx rx wires?
follow the plug down further. there will be a connector and it changes after that connector. either way it's as easy as goign by the pinout. ------------- A DMM is a beautiful thing.
MECP Advanced Installer Certified.
|