2002 Ram Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11897
Printed Date: May 14, 2024 at 12:21 PM
Topic: 2002 Ram Remote Start
Posted By: wvumounty
Subject: 2002 Ram Remote Start
Date Posted: April 07, 2003 at 7:28 AM
I have my remote start and keyless entry working, all except the Air Conditioner. I am guessing I missed an accessory wire? Any help would be greatly appreciated.
Replies:
Posted By: Trav3D1
Date Posted: April 07, 2003 at 12:01 PM
Most 2002 Dodge Rams have 2 accessory wires in the ignition harness.......the colors should be BLACK/ white and blue. You will need to connect the accessory wire from the alarm to both of the wires in order for the AC to work. The second of the two wires will require a relay. Let me know if your uncertain how to hook this up and I will send you the specs. Jazz3D1@excite.com ------------- Trav
Posted By: wvumounty
Date Posted: April 07, 2003 at 12:12 PM
My alarm has two wires for accessory. I hooked up accessory 1 from alarm to
1st accessory to truck and second to each. Can you send me the specs and I
will double check? Any other ideas?
Posted By: Trav3D1
Date Posted: April 07, 2003 at 12:24 PM
This is were the relay comes into play, because AC is usually requires high current. This is also very typical if you have a front and a rear unit that operate seperate from one another. Do you want the vehicle specs. or the relay specs. ------------- Trav
Posted By: wvumounty
Date Posted: April 07, 2003 at 12:30 PM
I need the relay specs... so you are saying put the relay on the second wire? (blue wire)
Thanks again
-Jeff
Posted By: JWorm
Date Posted: April 07, 2003 at 6:34 PM
your truck has two ignitions and 2 accessories.
12volts pnk/blk & RED / wht
Starter yellow
Ignition blue (16 awg)
Second Ignition red or RED / wht
Accessories green & orange
Posted By: CCRoadshop
Date Posted: April 08, 2003 at 12:02 AM
take a relay and hook the RED / brown wire up to twelve volts, hook the black wire to the ribbon cable color of the accessory wire on the remote start(in most cases orange, and then hook the yellow up to the 2nd accessory wire.....if these colors arent on your relay...lemme know ill tell u what pins to hook up
-------------
Installer - Circuit City Roadshop(2 1/2 years n counting)
------------------
Alpine CDA7894(soon to be the cda9815)
Pioneer XM unit(soon to be direct link alpine)
Audiovox 995C alarm/remote start
Posted By: wvumounty
Date Posted: April 09, 2003 at 7:12 AM
These are the wires I am using and currently have hooked up. I have a second ignition wire in my remote. My relay does not have wires only pins...87,86,87a,85 and 30. Can you tell me how to wire the relay?
IGNITION |blue (16 awg)
| SECOND IGNITION |red or RED / wht
| ACCESSORY |green & orange
| SECOND ACCESSORY |blue & blk/wht
Posted By: Homicyde
Date Posted: April 09, 2003 at 9:30 PM
you will need 2 seperate relays, one for the green and one for the orange. take pin 87, hook it to fused 12 volts. pin 86, fused 12 volts. pin 85, needs to be a ground only when the remote starter is running the engine. And pin 30, goes to the green and orange wires. just dont forget to use a relay for each wire. chris-
Posted By: wvumounty
Date Posted: April 21, 2003 at 7:09 AM
Thanks that worked great. I have another problem. When I unlock/lock the doors all that blinks is the dashboard, the parking lights don't flash.
However if I have the key to the on position, the lights flash.
Posted By: Velocity Motors
Date Posted: April 21, 2003 at 8:38 AM
What wire did you attach to the parking light output of the RS ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: wvumounty
Date Posted: April 21, 2003 at 2:30 PM
BLACK / YELLOW
Posted By: Velocity Motors
Date Posted: April 21, 2003 at 2:47 PM
Wow, that's weird ?? If you add 12 volts to the parking light wire of the RS, does the parking lights turn on ? Try this and post your results.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: wvumounty
Date Posted: April 21, 2003 at 3:57 PM
oh... also the lights run when the truck is started... do you still want me to test the power to the wire?
Posted By: Velocity Motors
Date Posted: April 21, 2003 at 5:39 PM
Yes, test the wire with the truck off. It should not matter if the truck is on or not if you are to add 12 volts to this wire, the parking lights will still turn on.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|